Tips & Tricks for a successful HORIZON-CL5-2027-03-D5-05 proposal

Opening

15 December 2026

Deadline

14 April 2027

Keywords

Modular battery

high voltage

2ZERO Partnership

Heavy Duty Vehicles

modular powertrain

Megawatt Charging System

Electronic infrastructures

Your microfluidic SME partner for Horizon Europe

We take care of microfluidic engineering, work on valorization and optimize the proposal with you 

HORIZON-CL5-2027-03-D5-05: Higher Voltage, Megawatt Charging System compatible, modular powertrain for Heavy Duty Vehicles (HDV) (2ZERO Partnership)

What changes thermally when a truck switches from driving to megawatt charging?

Driving and charging impose different heat-load profiles, so cooling tests need to reflect the components active in each operating mode. In a battery-platform study, megawatt charging events were limited because the cells were not designed for sustained high-rate charging. [1] Microfluidics Innovation Center (MIC) could contribute as a consortium partner by developing controlled-flow tests for power-electronics cooling modules.

Within the completed Horizon 2020 ThermaSMART project, MIC worked with Cherry Biotech on the design of a microprocessor phase-change cooling platform. That work provides relevant experience for investigating microchannel cooling configurations with powertrain partners.

HORIZON-CL5-2027-03-D5-05 — Higher Voltage, Megawatt Charging System compatible, modular powertrain for Heavy Duty Vehicles (HDV) (2ZERO Partnership) — connects thermal management with a wider engineering task: selecting voltages above 800 V that balance efficiency, affordability and performance. The topic seeks modular vehicle solutions compatible with the Megawatt Charging System (MCS), including benefits for auxiliary components and a reduction in charging losses within the vehicle.

HORIZON-CL5-2027-03-D5-05

Download the MIC Horizon Europe 2026/2027 Calls Calendar:

Discover more!

Administrative facts: what do we know about the HORIZON-CL5-2027-03-D5-05 call?

Which call is it, and when is the opening and the deadline?

  • Call name: MOBILITY
  • Call identifier: HORIZON-CL5-2027-03
  • Destination: Clean and competitive solutions for all transport modes
  • Topic: HORIZON-CL5-2027-03-D5-05
  • Opening date: 15 December 2026
  • Deadline: 14 April 2027
  • Type of action: Innovation Action (IA), lump sum funding

What about the budget and estimated size of the project?

  • Overall budget for this topic: EUR 16.00 million
  • Number of projects expected to be funded: 2
  • Budget per project: around EUR 8.00 million

What are the key eligibility and evaluation conditions?

  • Standard Horizon Europe eligibility (General Annex B)
  • TRL 7 expected by end of project; activities may start at any TRL
  • If satellite-based data is used, Copernicus and/or Galileo/EGNOS must be included
  • Subject to restrictions for the protection of European communication networks
  • IP restriction: the granting authority may object to transfer of ownership or exclusive licensing of results up to 4 years after the end of the action
  • Part of the co-programmed 2ZERO Partnership; projects must report on 2ZERO KPIs

Scientific range: what does the Commission expect from the HORIZON-CL5-2027-03-D5-05 grant?

What outcomes are expected?

The Commission seeks to show evidence that exceeding 800 V in fact operates effectively with heavy-duty vehicles, not only in cost saving, but also in flexibility. At the project conclusion, you were expected to demonstrate that it is possible to integrate modular high-voltage powertrain systems with various vehicle types in the commercial sector, that losses during the charging process within the vehicle are reduced by at least 10%, and that the entire system can be used with Megawatt Charging Systems. Not a paper study. Actual automobiles in actual surroundings.

What is within scope?

  • Architectures of powertrains Post-800 V that were designed on efficiency, affordability, performance, and MCS compatibility.
  • Modular powertrain systems are used to provide customized applications and maintain a degree of flexibility to wider applications, such as specific hardware and software interfaces.
  • Removable and modular battery systems that have the potential to allow second-life uses.
  • Standardized system designs in an effort to economize on scale and increase component life cycles.
  • Interaction with novel Electrical/Electronic (E/E) infrastructures and thermal administration plans.
  • The analysis of life-cycle cost in relation to past low voltage systems.
  • Relevant environment (not laboratory only) demonstration.

What are the specifically proposed research directions?

  • Raise voltage to more than 800 V to determine the optimal position on the curve between efficiency, cost and compatibility with MCS and a quantified 10% drop in vehicle-side charging losses.
  • Show the advantage of high-voltage platforms to auxiliary components (thermal management is the one the Commission continues to refer to, and modular interchangeability is one feature of it)
  • Design and exhibit modular powertrain structures in a range of applications, not only to one type of truck but applicable to the HDV segment.
  • Consider the possibility of opening second-life pathways with removable battery modules, a step toward the goal of a circular economy.

Scientific strategy: how can you enhance your chances of being funded through HORIZON-CL5-2027-03-D5-05?

What scientific choices matter most?

  • The Commission specifically requests an optimum level, or in other words, you have to explain why your determined voltage would be the one that is the sweet spot in terms of safety, efficiency and cost. Those reviews will see whether you omit such an analysis.
  • Modularity must have a connotation. Specify the interfaces, software and hardware. Any proposal that simply refers to the powertrain as modular without specification of the plugs into the plugs will not do well.
  • It should include a life-cycle cost comparison with existing 800 V systems. It is directly requested in the work programme. We have seen suggestions evade this and miss on hitting.
  • Showcase in the pertinent settings. The objective is TRL 7. It will not suffice to have lab prototypes only.
  • MCS compatibility is not voluntary. You have to make your charging demonstration out of it, not as an appendix.
  • Even though they may not be the primary focus of the proposal, the considerations that apply to second-life batteries should be mentioned at the beginning of the proposal. It is discussed by the Commission, and neglecting it entirely would create a vacuum.

Consortium and proposal-writing plan: what works best with this type of call?

  • Achieve around 8 to 12 partners or so. Funding will be made on two projects and hence the competition will be stiff yet not impossible.
  • An HDV OEM or Tier 1 supplier (at least one of them) is required; otherwise, the demonstration component is not convincing. The better the modularity argument is, the more two OEMs that are in different segments of the vehicle.
  • Inclusiveness of a power electronics specialist, ideally a specialist with high-voltage automotive experience. A creative SME that has a particular understanding of MCS interfaces or thermal control would give the consortium an extra boost and introduce the flexibility that big partners may lack at times (this one surprises people during evaluation).
  • This is enhanced by a research institute or university in the design and life-cycle cost assessment of the E/E architecture. Do not stuff the consortium with academia though.
  • As long as you have a charging infrastructure provider in your consortium, it will assist in making the MCS demonstration credible without the need to rely on the third-party availability.
  • Prepare the impact section concerning a reduction in cost of the European HDV industry. The reviews react to specific numbers on the TCO improvement, rather than vague decarbonisation statements.

How would microfluidics contribute to this topic?

Microfluidics could support the development and testing of cooling modules for power electronics, contributing to the topic’s thermal-management and energy-efficiency objectives. Within the completed Horizon 2020 ThermaSMART project, the Microfluidics Innovation Center (MIC) worked with Cherry Biotech on the design of a microprocessor phase-change cooling platform.

As a consortium partner, MIC could develop controlled-flow experimental setups to compare microchannel cooling configurations. Testing could assess heat removal, temperature distribution, pressure drop and pumping power under thermal load profiles defined with powertrain partners.

The proposed output would be thermal and hydraulic performance maps, together with operating limits and requirements for integration into the vehicle’s cooling system. Comparing candidate configurations with the consortium’s reference solution would help establish whether improvements in cooling justify their energy consumption, complexity and cost.

Powertrain and vehicle partners would need to define component interfaces, representative duty cycles and electrical integration constraints. Further validation would address coolant compatibility, leakage, durability and performance during repeated operating cycles.

This contribution would support cooling-system selection and integration. Its value would depend on demonstrating a benefit to the complete powertrain, including auxiliary energy consumption and operation during charging.

The MIC already brings its expertise in microfluidics to Horizon Europe:

H2020-NMBP-TR-IND-2020

Mission Cancer, Tumor-LN-oC_Tumor-on-chip_Microfluidics Innovation Center_MIC

Tumor-LN-oC

Microfluidic platform to study the interaction of cancer cells with lymphatic tissue

H2020-LC-GD-2020-3

Logo_Lifesaver-Microfluidics-Innovation-Center_Mission Cancer_MIC

LIFESAVER

Toxicology assessment of pharmaceutical products on a placenta-on-chip model

H2020-LC-GD-2020-3

Alternative_Logo_microfluidic_in-vitro-system-biomedical-research-Microfluidics-Innovation-Center_Mission Cancer

ALTERNATIVE

Environmenal analysis using a heart-on-chip tissue model

About the author

Julia

Julia Sepulveda Diaz, PhD
Chief Executive Officer, Microfluidics Innovation Center

Julia holds a PhD in glycobiology and neurobiology from Université Paris-Est Créteil. Before moving into microfluidics, she spent several years as a postdoctoral researcher at the Paris Brain Institute, on Parkinson’s disease, neuroinflammation, and the role of heparan sulfate in protein aggregation. Today she leads the Microfluidics Innovation Center as CEO, steering its researchers and engineers and its collaborative research and innovation projects.

FAQ – HORIZON-CL5-2027-03-D5-05

Does a higher pack voltage automatically reduce heating inside the battery cells?

No. Lower bus current does not by itself establish lower cell-level heating: the series/parallel arrangement and current through each cell also matter. Güralp and colleagues modelled these quantities separately in their reconfigurable battery platform. Cell resistance and operating conditions must be included in the assessment. [1]

It concerns charging losses within the vehicle, rather than a 10% reduction in all charging energy or a ten-percentage-point efficiency increase. For illustration, reducing a measured loss from 10 kWh to 9 kWh is a 10% relative reduction. This example does not define the project’s baseline or test conditions; those need justification against the official topic.

Peak power does not show how much energy is delivered over the full charging interval. Report the power trace, energy delivered, starting and ending state of charge, temperatures and any power limitation. The megawatt battery-platform study used a limited number of high-power events; it did not establish repeated lifetime performance. [1]

No. The battery must still cover the driving interval between charging opportunities. Schneider and colleagues’ scenario analysis found that the benefits of higher charging power depended on the stop strategy; smaller batteries under multi-stop strategies also demanded higher charging rates and cycle stability. These were modelled operating scenarios, not fleet demonstrations. [2]

No. A power measurement alone does not demonstrate compatible connectors, communication or vehicle–charger operation. The CharIN Megawatt Charging System overview describes a system covering the connector, vehicle, charging equipment and communication. A project should identify the applicable specifications and test interoperability within its supported voltage, current and thermal limits.

Not on its own. The comparison should also account for the energy used by pumps, fans and refrigeration where present. Match the heat load and boundary conditions, then report the cooling result alongside auxiliary consumption. A cooler component can still require more system energy; both quantities inform the design decision.

Define the coolant, permitted temperatures and pressures, flow requirements, connections, sensing and control signals, and installation envelope. A useful interface specification also states how compatibility will be checked after a module is replaced. These are proposed design checks, not additional numerical thresholds imposed by the topic.

No. Their roles depend on the vehicle’s duty pattern. Speth and Plötz simulated charging needs using historical German truck trips and future vehicle-range assumptions. Depot charging supplied most needs in their analysis, while high-power charging remained important for long-haul operation. Those findings do not establish one charging mix for every fleet. [3]

No. Removability addresses access and separation; it does not establish remaining capacity, condition or suitability for a new application. A useful second-life assessment identifies the intended reuse, the information transferred with the battery and the tests needed to establish acceptance for that use.

Vehicle partners would need to confirm that the tested loads, coolant conditions and interfaces represent the intended installation. The Microfluidics Innovation Center’s proposed module maps would then inform integration tests, including transient operation and auxiliary energy use. Its earlier microprocessor-cooling design work does not establish automotive durability or vehicle-level validation.

[1] Güralp, O.; Bucknor, N.; Raghavan, M. Development of a Megawatt Charging Capable Test Platform. Machines 2026, 14(3), 317. https://doi.org/10.3390/machines14030317

[2] Schneider, J.; Teichert, O.; Zähringer, M.; Balke, G.; Lienkamp, M. The novel Megawatt Charging System standard: Impact on battery size and cell requirements for battery-electric long-haul trucks. eTransportation 2023, 17, 100253. https://doi.org/10.1016/j.etran.2023.100253

[3] Speth, D.; Plötz, P. Depot slow charging is sufficient for most electric trucks in Germany. Transportation Research Part D: Transport and Environment 2024, 128, 104078. https://doi.org/10.1016/j.trd.2024.104078